WSB-9454 CPU Card
Page 81
Step 2: Slowly slide the DIMM module along the plastic guides on both ends of the
socket. Press the DIMM module down into the socket until it clicks into position
and the two handles have automatically locked the memory module into place.
Step 3: To remove the memory module, push both handles outward, and the memory
module is ejected by the mechanism in the socket. Step 0:
4.5.4 Peripheral Device Connection
Cables provided by IEI that connect peripheral devices to the CPU Card are listed in
Table 4-1. Cables not included in the kit must be separately purchased.
Quantity Type
1 ATA 66/100 flat cable
2 SATA cables
1 SATA power cable
1 Keyboard/ PS2 mouse Y cable
1 RS-232 cable
1 USB cable
Table 4-1: IEI Provided Cables
To Next Page
Loading...
Need help?
General
