51
2
INSTALLATION PROCEDURE
302.061
CAUSE SOLUTION
It indicates that the bar pusher is not in the correct posi-
tion.
Using the keyboard controls, regain the correct posi-
tion.
ERROR CAUSE SOLUTION
The bar pusher does not go down.
An attempt was made to lower the
bar pusher with the bar pusher car-
riage out of position.
Move the bar pusher carriage to the
lower position.
CAUSE
Signals that the bar pusher carriage has returned.
ERROR CAUSE SOLUTION
Bar change was not completed in
the expected time.
To monitor unexpected mechanical
or electrical faults, a checking
system stops the machine if the bar
change cycle is not completed
within a set time.
Verify the nature of the fault and
restart the work cycle.
In case of serious faults, contact
IEMCA technical assistance.
40
Error:barpusherdow
nwa r d
41
(Error: . . . )
42
Mo v e c a r r i a g e t o b a c
klimitstop!!!
43
Ca r r i a g e t o ba ck l im
it stop!!!
44
Fa i lure dur ing bar c
hange
To Next Page