1 - 16
Cygnus 2 Operating Manual
1.4.16 Weight
With all options . . . . . . . . . . . . . . . . . . . . . . . 13 lb. (5.9 kg)
1.4.17 Cleaning
Use a mild, nonabrasive cleaner or detergent taking care to prevent cleaner from
entering Cygnus 2.
1.5 Unpacking and Inspection
1 If Cygnus 2 has not been removed from its shipping container, do so now.
2 Carefully examine Cygnus 2 for damage that may have occurred during
shipping. This is especially important if you notice obvious rough handling on
the outside of the container. Immediately report any damage to the carrier and
to INFICON.
3 Do not discard the packing materials until you have taken inventory and have
at least performed a power on verification.
4 Take an inventory of your order by referring to your order invoice and the
information contained in section 1.6 on page 1-16.
5 To perform a power-on verification, see section 1.7 on page 1-19.
6 For additional information or technical assistance, contact INFICON, refer to
section 1.3, How To Contact INFICON, on page 1-5.
1.6 Parts and Options Overview
1.6.1 Base Configurations
Cygnus 2 Control Unit . . . . . . . . . . . . . . . . . 781-500-G11 North America,
781-500-G12 Europe
Ship Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 781-020-G1 North America,
781-020-G2 Europe
Operating Manual on CD ROM . . . . . . . . . . 074-545 on 074-5000-G1 CD ROM
included in Ship Kit
I/O Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . Contains Input/Relay Interface
Connectors (8 relay outputs, 14 TTL
inputs). Included in Ship Kit.
To Next Page
Loading...
Need help?
General
