Inficon Cygnus 2 User Manual

12 - 2
Cygnus 2 Operating Manual
12.3 Configuration Files
With all Materials in the READY or STOP state, the configuration of Cygnus 2 may
be sent to a storage device attached to the USB port. Configuration files will be
written with the default name CYGNUS2.ISC. The configuration file can be named
within the eight-character limitation that exists in the USB file handling firmware.
File names cannot contain the space character. Cygnus 2 will use the .ISC
extension to identify configuration files. Cygnus 2 will ignore or reject IC/5 IC6, and
Cygnus.ISC configuration files—these files are not compatible with Cygnus 2.
Figure 12-1 Configuration files
NOTE: All Materials must be in Stop, READY or Idle mode to save a
configuration file.

Inficon Cygnus 2 Specifications

General

Brand	Inficon
Model	Cygnus 2
Category	Controller
Language	English