USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2017 Intel Corporation. All rights reserved 115
The UAV flies outside (laterally
or vertically) of the space pre-
viously dedicated for the flight.
Action 1 (before take-off)
Before you take off you can assure the UAV will
stay in the allocated space. You can limit the maxi-
mum distance and height from the take-off spot
the Intel Falcon 8+ UAV is started from by setting a
specific distance and height which will not be
exceeded by the UAV.
To set these boundaries from the Main Screen of
the Status Display ( see “STATUS DISPLAY” on
page 138):
1. Push ENT in the Main Screen.
The menu is opened
2. Use the arrow RIGHT/LEFT buttons to select
Settings.
3. Push ENT.
The Settings menu is opened.
4. Use the arrow RIGHT/LEFT buttons to select
Bounding Box.
5. Push ENT.
The respective menu is opened. Radius is
highlighted.
6. Push ENT.
The field behind Radius is highlighted.
7. Use the arrow RIGHT/LEFT buttons to
determine the radius the UAV should fly in.
The radius can be set from 10 m to 1000 m.
8. Push ENT.
The value is stored. Radius is highlighted.
9. Push the arrow RIGHT button one time to select
Height.
10.Push ENT.
The field behind Height is highlighted.
11.Use the arrow RIGHT/LEFT buttons to
determine the height the UAV should not
exceed.
The height can be set from 10 m to 300 m.
12.Push ENT.
The value is stored. Height is highlighted.
Table 3.5: Operational Guidelines In Case Of Emergency (Continued)
EVENT POSSIBLE ACTION
To Next Page
Loading...
Need help?
General
