Product Overview Intel
®
Entry Server Chassis SC5299-E TPS
Revision 3.1
Intel order number D37594-005
6
1.3 System Color
The Intel
®
Entry Server Chassis SC5299-E is offered in one color - Black (GE701)
1.4 Chassis Security
A variety of chassis security options are provided at the system level:
A removable padlock loop at the rear of the system access cover can be used to prevent
access to the microprocessors, memory, and add-in cards. A variety of lock sizes can be
accommodated by the 0.270-inch diameter loop.
A two-position key lock/switch will unlock the front bezel for DP, WS, and BRP
configurations.
A chassis intrusion switch is provided, allowing server management software to detect
unauthorized access to the system side cover.
Note: See the technical product specification appropriate to the server board for a description of
BIOS and management security features for each specific supported platform. Technical
product specifications can be found at http://intel.com/support
.
1.5 I/O Panel
All input/output (I/O) connectors are accessible from the rear of the chassis. The SSI E-bay
3.61-compliant chassis provides an ATX 2.2-compatible cutout for I/O shield installation. Boxed
Intel
®
server boards provide the required I/O shield for installation in the cutout. The I/O cutout
dimensions are shown in the following figure for reference.
I/O Aperture
Baseboard
Datum 0,0
5.196 ± 0.0106.250 ± 0.008
1.750 ± 0.008
(0.650)
(0.150)
0.100 Min keepout around opening
R 0.039 MAX, TYP
Figure 5. ATX 2.2 I/O Aperture
1.6 Rack and Cabinet Mounting Option
The Intel
®
Entry Server Chassis SC5299-E supports a rack mount configuration. The rack
mount kit includes the chassis slide rails, rack handle, rack orientation label, screws, and
manual. This rack mount kit is designed to meet the EIA-310-D enclosure specification. General
rack compatibility is further described in the Server Rack Cabinet Compatibility Guide found at
http://intel.com/support
.
To Next Page
Loading...
Need help?
General
