Intermec CN51 - Australia Post Settings; Aztec Settings

Chapter 3 — Use the Scanner
44 CN51 Mobile Computer User Manual
Australia Post Settings
This section lists all configurable settings for decoding the Australia
Post symbology.
Aztec Settings
This section lists all configurable settings for decoding the Aztec
symbology.
Australia Post Settings and Descriptions
Setting Description
User defined symbology ID Sets the symbology ID for Australia Post.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is P3.
Code mark A one-character code mark that serves as
an identifier for Australia Post. Default is
*.
Aztec Settings and Descriptions
Setting Description
Structured append mode Enables or disables Aztec structure
append mode. Default is disabled.
Runes Enables or disables Aztec Runes, which
are special Aztec symbols. Default is
disabled.
GS1-128 emulation Enables or disables GS1-128 emulation.
Default is disabled.
User defined symbology ID Sets the symbology ID for Aztec. Range is
1 to 4 ASCII characters. \xFF is not
supported.
Default is D3.
Code mark A one-character code mark that serves as
an identifier for Aztec. Default is *.