Intermec CN51 - Scanner Security and Trigger Modes

Chapter 3 — Use the Scanner
CN51 Mobile Computer User Manual 59
GS1 DataBar Limited Settings
This section lists all configurable settings for decoding the GS1
DataBar Limited symbology.
GS1 DataBar Omni-Directional Settings
This section lists all configurable settings for decoding the GS1
DataBar Omni-Directional symbology.
GS1 DataBar Limited Settings and Descriptions
Setting Description
User defined symbology ID Sets the symbology ID for GS1 DataBar
Limited. Range is 1 to 4 ASCII characters.
\xFF is not supported.
Default is C4.
Code mark A one-character code mark that serves as
an identifier for GS1 DataBar Limited.
Default is *.
GS1 DataBar Omni-Directional Settings and Descriptions
Setting Description
User defined symbology ID Sets the symbology ID for GS1 DataBar
Omni-Directional. Range is 1 to 4 ASCII
characters. \xFF is not supported.
Default is C3.
Code mark A one-character code mark that serves as
an identifier for GS1 DataBar
Omni-Directional.
Default is *.