Chapter 3 — Use the Scanner
CN51 Mobile Computer User Manual 71
Sweden Post Settings
This section lists all configurable settings for decoding the Sweden
Post symbology.
Telepen Settings
This section lists all the configurable settings for decoding the Telepen
symbology.
Length 1 Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 6.
Length 2 Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Length 3 Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Sweden Post Settings and Descriptions
Setting Description
User defined symbology ID Sets the symbology ID for Sweden Post.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is P7.
Code mark A one-character code mark that serves as
an identifier for Sweden Post.
Default is *.
Telepen Settings and Descriptions
Setting Description
Format Sets the format. Options include:
• ASCII (default)
• Numeric: Must be an even number of
digits
Standard 2 of 5 Length Mode Settings and Descriptions (Continued)
Setting Description
To Next Page
Loading...
