Chapter 1 — About the Computer Features
CN51 Mobile Computer User Manual 5
Change the Battery
When the battery in the CN51 has a low charge, replace it with a
charged battery to maintain your network connections.
1 Save all your files and close all open applications.
2 Press and hold the Power button. This screen appears:
3 Tap Battery Swap. The computer briefly shows a status message
and the LEDs turn on. When the LEDs turn off, continue with the
next step.
If the computer is in a dock, you must remove it from the dock
before you can select Battery Swap.
Note: When you remove a battery from the computer, Intermec
recommends that you install a charged battery within 90 seconds to
maintain your network connections.
To Next Page
Loading...
