Chapter 3 — Use the Scanner
CN51 Mobile Computer User Manual 51
Code 93 Settings
This section lists all configurable settings for decoding the Code 93
symbology.
Code 93 Settings and Descriptions
Setting Description
User defined symbology ID Sets the symbology ID for Code 93. Range
is 1 to 4 ASCII characters. \xFF is not
supported.
Default is B6.
Code mark A one-character code mark that serves as
an identifier for Code 93.
Default is D.
Code 93 Length Mode Settings and Descriptions
Setting Description
Length Mode Sets the length mode for decoding. Options include:
• Length 1 minimum (default)
• Lengths 1,2,3 fixed
• Length 1 minimum, length 2 maximum
Length 1 Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 1.
Length 2 Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Length 3 Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
To Next Page
Loading...
