Chapter 3 — Use the Scanner
64 CN51 Mobile Computer User Manual
Maxicode Settings
This section lists all configurable settings for decoding the Maxicode
symbology.
Micro PDF417 Settings
This section lists all configurable settings for decoding the Micro
PDF417 symbology.
Length 2 Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Length 3 Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Maxicode Settings and Descriptions
Setting Description
Mode 0 Enables or disables Mode 0 for Maxicode.
Default is disabled.
User defined symbology ID Sets the symbology ID for Maxicode.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is D2.
Code mark A one-character code mark that serves as
an identifier for Dutch Post.
Default is *.
Micro PDF417 Settings and Descriptions
Setting Description
Code 128 emulation Enables or disables Code 128 emulation
for Micro PDF417.
Default is disabled.
User defined symbology ID Sets the symbology ID for Micro PDF417.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is C7.
Matrix 2 of 5 Length Mode Settings and Descriptions (Continued)
Setting Description
To Next Page
Loading...
