Chapter 3 — Use the Scanner
48 CN51 Mobile Computer User Manual
Codablock F Settings
This section lists all configurable settings for decoding the Codablock
F symbology.
Code 11 Settings
This section lists all configurable settings for decoding the Code 11
symbology.
Codablock F Settings and Descriptions
Setting Description
User defined symbology ID Sets the symbology ID for Codablock F.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is K1.
Code mark A one-character code mark that serves as
an identifier for Codablock F.
Default is *.
Code 11 Settings and Descriptions
Setting Description
Verify check digit Sets the check digit to 1 or 2 digits.
Default is 2.
Transmit check digit Enables or disables transmission of the
check digit as part of the bar code data.
Default is enabled.
User defined symbology ID Sets the symbology ID for Code 11. Range
is 1 to 4 ASCII characters. \xFF is not
supported.
Default is C1.
Code mark A one-character code mark that serves as
an identifier for Code 11.
Default is *.
To Next Page
Loading...
