Intermec EasyCoder 501 E User Manual

Intermec EasyCoder 501 E – Installation & Operation Ed. 1 107
Chapter 10 Options
Clear Door Panel
As standard, the EasyCoder 501 E is fi tted with a solid door on
its right side. This door can easily be replaced by a door with a
clear panel that makes it possible to check the media supply without
opening the door.
Remove the existing door by opening it and pressing it forward until
the snap-lock at the rear hinges becomes disengaged. Remove the
door from the hinges and fi t the new door in reverse order.
Clear Panel

Intermec EasyCoder 501 E Specifications

General

Brand	Intermec
Model	EasyCoder 501 E
Category	Label Maker
Language	English