Intermec EasyCoder 501 E – Installation & Operation Ed. 136
Chapter 5 Media Load
Peel-Off
(Self-strip)
The EasyCoder 501 E printers can print on labels, tickets, tags, and
continuous stock in various forms. This section describes the case
when self-adhesive labels are separated from the liner immediately
after printing. The liner is then wound up on an optional integral liner
takeup hub. This is also known as “Self-strip” operation.
Peel-off can only be used for:
• Self-adhesive labels with liner
1 2
Open the front and side doors.
Turn the printhead lift lever to “Load” posi-
tion.
To Next Page
Loading...
