Intermec EasyCoder 501 E User Manual

Intermec EasyCoder 501 E – Installation & Operation Ed. 1 7
7
Chapter 1
Introduction
The Intermec EasyCoder 501 is a series of modular multipurpose
thermal transfer/direct thermal printers. They come in four main
models, each with its own Installation & Operation manual:
• EasyCoder 501 S (Standard) is an 8 or 11.81 dots/mm (203.2
or 300 dpi) printer mainly intended to be controlled by a host
computer using standard or custom-made application software, for
example the various Intermec LabelShop label-design programs
for Microsoft Windows. Being a low-cost alternative, it has a
somewhat lower print speed and fewer options than the other
members of this printer family. EasyCoder 501 S can be fi tted
with an optional scaleable fonts kit that allows the use of outline
fonts in Speedo and TrueType format. The EasyCoder 501 S is
distinguished by the single Print key on its front panel.
• EasyCoder 501 E (Enhanced) offers higher print speed than
EasyCoder 501 S. The larger number options in regard of media
handing and computer connection makes this printer a highly
fl exible alternative. It is recommended for installations, where
you want to switch between different application programs, or
create your own programs in the built-in Intermec Fingerprint
programming language. EasyCoder 501 E can, as an option, be
fi tted with a scaleable fonts kit that allows the use of outline fonts
in Speedo and TrueType format. This printer model can easily be
recognized by its 22-key membrane-switch keyboard.
• EasyCoder 501 LinerLess is an 8 dots/mm (203.2 dpi) EasyCoder
501 E that has been specially adapted to print on direct thermal
linerless media, which is torn off manually or cut off using an
optional cutter. Linerless printing eliminates the liner (backing
paper), that usually protects the adhesive side of self-adhesive
labels, and is thus more economical with 60% more labels per roll,
which gives fewer media reloads. Variable label length allows for
fewer label sizes in stock. The environment also benefi ts from less
waste. Linerless media gives higher resistance against chemicals,
scratching, and UV-light and a darker print image with longer life
than common direct thermal labels with liner.
• EasyCoder 501 SA (Stand-Alone) is just as quick and fl exible
as the EasyCoder 501 E model, but is fi tted with a special
“Stand-Alone” software, which allows the printer to be operated
independently, without any computer connection. This printer
model is fi tted with a large built-in alphanumeric keyboard.
Models

Intermec EasyCoder 501 E Specifications

General

Brand	Intermec
Model	EasyCoder 501 E
Category	Label Maker
Language	English