Intermec EasyCoder 501 E User Manual

Intermec EasyCoder 501 E – Installation & Operation Ed. 152
Chapter 7
Setting Up the Printer
Description
The setup controls the printer in regard of serial communication,
media feed, and print speed, and specifi es which type of media and
(optionally) ribbon is loaded in the printer.
Check the list of the printer's default setup parameters on the next
page to see if they match your requirements. If not, you will have
to change the setup using one of the methods described below.
The setup may also be changed, manually or automatically, by
Intermec PrintSet, InterDriver, and LabelShop, or by third-party
application programs.
• Setup Mode
- Press the <Setup> key on the printer’s built-in keyboard to
enter the Setup Mode, or
- select the Setup option in Intermec Shell to enter the
Setup Mode, or
- execute the Intermec Fingerprint SETUP instruction to
enter the Setup Mode.
See Chapter 8, “Setup Mode”.
• Intermec Shell
- Use the Terminal Setup option to change the setup remotely
from the host.
See Chapter 9, “Intermec Shell” in this manual.
• Intermec Fingerprint
- Use setup strings to change individual setup parameters
remotely from the host, or
- use setup fi les to create sets of setup parameters remotely
from the host.
See Intermec Fingerprint v6.14, Reference Manual.
• Intermec Direct Protocol
- Use setup strings to change individual setup parameters
remotely from the hos.
See Intermec Direct Protocol v6.13, Programmer’s Guide.

Intermec EasyCoder 501 E Specifications

General

Brand	Intermec
Model	EasyCoder 501 E
Category	Label Maker
Language	English