Intermec EasyCoder 501 E User Manual

Intermec EasyCoder 501 E – Installation & Operation Ed. 112
Chapter 2 Print a Label
The label we will design in Intermec Fingerprint will contain a box,
an image, a bar code, and a line of text. Note that the illustrations
are not reproductions of the label, but are merely intended to show
the principles of label editing.
Printing a Box
Let us start by printing a box 430 dots high and 340 dots wide
with a 15 dot line thickness. The box is inserted at position X=10;
Y=10:
NEW
10 PRPOS 10, 10 ↵
20 PRBOX 430,340,15 ↵
200 PRINTFEED ↵
300 END ↵
RUN ↵
Note: The printer does not execute the program until you have
typed RUN ↵.
Printing an Image
Now we add the image “GLOBE.1” after changing the print
coordinates to X=30; Y=30.
Note that the characters enclosing the word GLOBE.1 are quotation
marks (ASCII 034 decimal/22 hex) and indicate a string expression
(text) as opposed to a numeric expression (value). The same applies
to bartypes, bar code input data, barfonts, text fonts, and input to
text fi elds later in this chapter.
30 PRPOS 30,30 ↵
40 PRIMAGE "GLOBE.1" ↵
RUN ↵
Printing a Bar Code
You need to choose a bar code type before you can print a bar code.
Note there is no blank space in the bartype name. Then provide
the input data to the bar code.
50 PRPOS 75,270 ↵
60 BARTYPE "CODE39" ↵
70 PRBAR "ABC" ↵
RUN ↵
Using Intermec
Fingerprint
Y
X
MEDIA FEED

Intermec EasyCoder 501 E Specifications

General

Brand	Intermec
Model	EasyCoder 501 E
Category	Label Maker
Language	English