Intermec EasyCoder 501 E User Manual

Intermec EasyCoder 501 E – Installation & Operation Ed. 1110
Chapter 12
Maintenance
Printhead
Cleaning
Cleaning the printhead on a regular basis is important for the life
of the printhead and for the printout quality. You should clean the
printhead each time you replace the media. This section describes
how to clean the printhead using cleaning cards. If additional
cleaning is required, for example removing adhesive residue from
the platen roller or tear bar, use a cotton swab moistened with
isopropyl alcohol.
Warning!
Isopropyl alcohol [(CH
3
)
2
CHOH; CAS 67-63-0] is a highly
fl ammable, moderately toxic, and mildly irritating substance.
1 2
Open the front and side doors.
Turn the printhead lift lever to “Load” posi-
tion.

Intermec EasyCoder 501 E Specifications

General

Brand	Intermec
Model	EasyCoder 501 E
Category	Label Maker
Language	English