Intermec EasyCoder 501 E – Installation & Operation Ed. 170
Chapter 7 Setting Up the Printer
Service, cont.
Setup Parameters, cont.
Memory Allocation
The Memory Allocation parameters allow you to set the size for
three kinds of memory buffers:
• The Image Buffer stores the printout image before printing and
during batch printing. To ensure that high print speed is sustained
during the printing of demanding label formats, the size of the
Image Buffer may need to be increased. The maximum size of
the image buffer is 250 kbytes.
• The Receive Buffer stores the input data received on the
serial communication channel "uart1:" before processing. The
fi rmware is able to detect if an optional serial interface board
is installed. If so, the size of the receive buffer for each serial
communication channel ("uart1:", "uart2:", and "uart3:") can
be set separately.
• The Transmit Buffer stores the output data on the serial
communication channel "uart1:" before transmission. The
fi rmware is able to detect if an optional serial interface board
is installed. If so, the size of the transmit buffer for each serial
communication channel ("uart1:", "uart2:", and "uart3:") can
be set separately.
To Next Page
Loading...
