Intermec EasyCoder 501 E User Manual

Intermec EasyCoder 501 E – Installation & Operation Ed. 1 69
Chapter 7 Setting Up the Printer
Setup Parameters, cont.
Service, cont.
Performance
The Performance setup parameter allows you to decide the print
speed. Three options are displayed: Normal (default), High, and
Ultra High. These options translate to different nominal print
speeds depending on printhead density, type of printing, and type of
supplies as illustrated by the tables below. Supplies, which have been
specifi ed using the “New Supplies” option, have fi xed print speed
settings that overrides the “Performance” setup.
Printhead density 8 dots/mm (203.2 dpi)
Thermal Transfer Printing GP/Standard & HP/Premium Ribbons
Performance Text Printing Hor. Bar Code Vert. Bar Code
Normal 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
High 200 mm/sec (8 in/sec) 200 mm/sec (8 in/sec) 100 mm/sec (4 in/sec)
Ultra High 200 mm/sec (8 in/sec) 200 mm/sec (8 in/sec) 200 mm/sec (8 in/sec)
Thermal Transfer Printing HR/Super Premium Ribbons
Performance Text Printing Hor. Bar Code Vert. Bar Code
Normal 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
High 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
Ultra High 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
Direct Thermal Printing
Performance Text Printing Hor. Bar Code Vert. Bar Code
Normal 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
High 150 mm/sec (6 in/sec) 150 mm/sec (6 in/sec) 100 mm/sec (4 in/sec)
Ultra High 150 mm/sec (6 in/sec) 150 mm/sec (6 in/sec) 150 mm/sec (6 in/sec)
Horizontal
(Picket Fence)
Vertical
(Ladder)
Feed
Direction
Bar Code Directions
Printhead density 11.81 dots/mm (300 dpi)
Thermal Transfer Printing GP/Standard & HP/Premium Ribbons
Performance Text Printing Hor. Bar Code Vert. Bar Code
Normal 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
High 125 mm/sec (5 in/sec) 125 mm/sec (5 in/sec) 100 mm/sec (4 in/sec)
Ultra High 125 mm/sec (5 in/sec) 125 mm/sec (5 in/sec) 125 mm/sec (5 in/sec)
Thermal Transfer Printing HR/Super Premium Ribbons
Performance Text Printing Hor. Bar Code Vert. Bar Code
Normal 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
High 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
Ultra High 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
Direct Thermal Printing
Performance Text Printing Hor. Bar Code Vert. Bar Code
Normal 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec) 100 mm/sec (4 in/sec)
High 125 mm/sec (5 in/sec) 125 mm/sec (5 in/sec) 100 mm/sec (4 in/sec)
Ultra High 125 mm/sec (5 in/sec) 125 mm/sec (5 in/sec) 125 mm/sec (5 in/sec)

Intermec EasyCoder 501 E Specifications

General

Brand	Intermec
Model	EasyCoder 501 E
Category	Label Maker
Language	English