Intermec EasyCoder 501 E – Installation & Operation Ed. 1 129
Appendix 2 Media Specifi cations
Media, cont.
⇐ a ⇒ Media Width (including liner)
Maximum: 120.0 mm (4.72 inches)
Minimum: 25.4 mm (1.00 inches)
⇐ b ⇒ Liner
The liner must not extend more than a total of 1.6 mm (0.06
inches) outside the face material and should protrude equally
on both sides.
⇐ c ⇒ Media Width (excluding liner)
Maximum: 118.4 mm (4.66 inches)
Minimum: 23.8 mm (0.94 inches)
Media Type Setup
• Fix length strip
• Var length strip
This type of media is not suitable for use with a cutter.
Self-Adhesive Strip
To Next Page
Loading...
