Intermec EasyCoder 501 E User Manual

Intermec EasyCoder 501 E – Installation & Operation Ed. 1 125
Appendix 1 Technical Data
Sensors
Label Gap/Black Mark/Out of Media Yes Variable position
Ribbon End Yes
Printhead Lifted Yes
Controls
Control Lamps 3
Display 2 x 16 character LCD
Keyboard 22 keys membrane-switch type
Beeper Yes
Data Interfaces
Serial 1 x RS-232 (prepared for RS-422
2
or 20 mA CL
2
)
Connection for Optional Interface Board 1
Accessories and Options
Paper Cutter Option
2
Memory Card Adapter Option
2
Label Taken Sensor Option
2
Real Time Clock Option
2
Ribbon Save Device Option
4
Sensor Kit Option
2
Ribbon low/Media low
Parallel Interface Board Option
2
Double Serial Interface Board Option
2
RS-422/485 Serial Interface Board Option
2
Industrial Interface Board Option
2
Liner Takeup Unit Option
4
Incl. batch takeup guide
Media Roll Retainer Option
3
External Supply Guides Option
3
RS-232 Cable Option
3
Parallel Interface Cable Option
3
External Alphanumeric Keyboard Option
3
Scaleable Fonts Kit Option
2
Clear Door Panel Option
2
For view of media roll
1
/. Pure direct thermal confi guration is only available as a factory-installed option.
2
/. Available as factory installed option or fi eld-installable kit.
3
/. Field-installable option only.
4
/. Factory-installable option only.
Technical Data, cont.

Intermec EasyCoder 501 E Specifications

General

Brand	Intermec
Model	EasyCoder 501 E
Category	Label Maker
Language	English