Intermec EasyCoder 501 E - Page 21

Intermec EasyCoder 501 E – Installation & Operation Ed. 120
Chapter 3 Installation
Media Com-
partment, cont.
The illustration below shows an EasyCoder 501 E with some options
installed. There are more options that are not illustrated here. Refer
the Appendix 1 for complete lists of standard features and options
for the EasyCoder 501 E.
Ribbon Supply Hub
Thermal Printhead
Tear Bar
Printhead Lift Lever
Slack Absorber
Liner Takeup
and Guide Shaft
(option)
Batch Takeup
Guide (option)
3-inch Adapter
Media Supply Hub
Media Roll
Retainer
(option)
External Supply Guides
(option)
Ribbon Rewind Hub
Cutter
(option)
Label Taken Sensor
(option)