What to do if the Error LED is turned on (solid light) on Intermec EasyCoder PD42 Printer?
If the Intermec Printer's Error LED is on with a solid light, it indicates a problem. Check the following: * Ensure the printer has media or ribbon. * Verify the printhead is closed and locked. * Check for jammed or tangled media. * Make sure the label gap sensor isn't blocked. * Inspect the cutter, if there is one.
What to do when Intermec Printer shows error during printing?
If your Intermec printer experiences an error during printing, consider the following: * Check if the printer is out of media or transfer ribbon. * Ensure the printhead lever is closed and locked. * If the printhead is closed and locked, but the problem persists, check connection to P34 on the main board. Check headlift microswitch. * Inspect for jammed or tangled media and clear any obstructions. * Examine the label gap sensor for obstructions and clean if necessary. * Recalibrate the sensors by running a testfeed.
What to do if the Error LED is turned on (flashing light) on Intermec EasyCoder PD42 Printer?
If the Intermec Printer's Error LED is flashing, it indicates a bad software setting. Check for bad software setting.
What to do if the Error LED is off, but Ready-to-Work LED is flashing on Intermec EasyCoder PD42?
If the Intermec Printer's Ready-to-Work LED is flashing, ensure that the printhead is closed and locked.
How to fix weak printout on Intermec EasyCoder PD42 Printer?
If the printout from your Intermec Printer is weak, check the following: * Density setting. * If the thermal printhead needs cleaning. * Printhead pressure. * Printhead dot line position.
Why is printing missing along the feed direction on Intermec Printer?
If the print image is missing along the feed direction on your Intermec Printer, try the following: * Check the transfer ribbon for wrinkles and creases, and reload if necessary. * Clean the printhead of any dirt, adhesive residue, or contamination. * Consider replacing the printhead if one or more heat-sensitive resistors are damaged. * Readjust the printhead balance, especially when switching between media of different widths.
Why part of the print image was not printed along the feed direction on Intermec EasyCoder PD42?
If the print image is partially missing along the feed direction on your Intermec Printer, check for: * Ribbon wrinkles and creases. * A thermal printhead that needs cleaning. * A damaged printhead. * Printhead balance issues. * Errors in the application program. * Power supply functionality.
Why is printout not in desired position on Intermec Printer?
If the printout from your Intermec Printer is not in the desired position, check the following: * Application settings. * The label gap sensor for disturbances. * The lateral position of the label gap sensor. * Calibrate the label gap sensor in Autoadjust Mode. * Check the label gap sensor for faults or bad connection. * The edge guide and media guides. * The media. * If the platen roller needs cleaning or replacing.
Why Intermec EasyCoder PD42 Printer is skipping pages when printing?
If your Intermec Printer is skipping pages during printing, try these solutions: * Perform a Test Feed or check your Media Settings. * Check the label gap sensor for any disturbances caused by media or dust.
How to fix uneven darkness across media path on Intermec EasyCoder PD42?
If you're experiencing uneven darkness across the media path with your Intermec Printer, check the printhead balance.
Introduces the printer's capabilities and suitability for medium-duty applications.
Describes the exterior, connectors, and media compartment of the printer.
Explains the function of the print button and the meaning of the LED indicators.
Details how to interact with the printer's display and soft keys for operation.
Explains various connection methods for the printer to a computer system.
Provides instructions for loading different types of media into the printer.
Step-by-step guide on how to load a thermal transfer ribbon.
Explains the various operational states the printer can enter.
Covers methods for modifying the printer's setup parameters.
Details how to use test modes for verification and troubleshooting.
Lists common issues affecting printer operation and provides solutions.
Addresses common issues related to the quality of printed output.
Guides on diagnosing and resolving communication issues with the printer.
Procedures for making adjustments to improve printer performance.
Provides detailed technical specifications for the printer.
Describes the standard and optional communication interfaces for the printer.
Lists optional hardware kits that add functionality to the printer.
Details the dimensions and specifications for media rolls.
Explains different paper types and their dimensions.
Details parameters for serial communication setup.
Covers parameters for configuring media characteristics.
Controls transfer ribbon mechanism and ribbon sensor.
Details parameters for serial communication setup.
Covers parameters for configuring media characteristics.
Details various configuration options like emulation and print speed.
General| Media Type | Labels, Tags, Wristbands |
|---|---|
| Print Technology | Thermal Transfer, Direct Thermal |
| Print Resolution | 203 dpi |
| Maximum Print Width | 104 mm (4.09 in) |
| Media Thickness | 0.003 in to 0.010 in (0.08 mm to 0.25 mm) |
| Connectivity | USB, Serial, Ethernet |
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Operating Temperature | +5°C to +40°C (+41°F to +104°F) |
| Storage Temperature | -40°F to 140°F (-40°C to 60°C) |
| Humidity | 10-90% RH non-condensing |
To Next Page