Intermec ScanPlus 1800 Installation Manual

5. Symbologies PDF417
102 ScanPlus 1800 - Installation Manual
PDF417
- two-dimensonal symbology only available with ScanPlus 1800 PDF
- alphanumeric full ASCII symbology - letter case defined
active (*)
\48\4D\60
- only available with ScanPlus 1800 PDF
not active
\48\4E\60
macro PDF
- macro PDF is used when :
- a long message requires more than one PDF417 label
- "optional fields" information must be transmitted to the host application
buffered (*)
\48\4F\01\60
- stores a multi-label PDF417 message in the
ScanPlus buffer
- transmits the whole message when all the
labels have been read
- you can read the labels in any order
- flashing green LED = end of read but message
not finished (read the next label)
- good read beep = end of message (message
transmitted and no green LED)

Intermec ScanPlus 1800 Specifications

General

Type	Handheld Barcode Reader
Connectivity	Wired
Scanning Technology	Laser
Scanning Capability	1D
Scan Rate	100 scans per second
Scan Pattern	Single Line
Resolution	0.1 mm
Supported Barcodes	Code 39, Code 128, Interleaved 2 of 5
Operating Temperature	0 °C to 40 °C
Storage Temperature	-20 °C to 60 °C
Light Source	Laser Diode