Intermec ScanPlus 1800 - Trigger Read Duration

6. Operating settings trigger activation
ScanPlus 1800 - Installation Manual 125
Manual)
- LASER SAFETY: the ScanPlus 1800 ST is a Class 2 Laser product - CAUTION - LASER
LIGHT WHEN OPEN. DO NOT STARE INTO BEAM.
active for read duration (2 s), repeat read duration after good read
\46\5B\45\5D\02\46\4C\60
active for read duration (2 s), standby after good read
\46\5B\45\5D\02\46\4D\60
active while trigger pressed, standby after good read
\46\5B\46\5A\03\3F\46\4D\60
trigger read duration
- same value for all trigger modes
- select a trigger mode before you compose a custom read duration (selecting a trigger mode
resets default read duration value of 2 s)
- LASER SAFETY: the ScanPlus 1800 ST is a Class 2 Laser product - CAUTION - LASER
LIGHT WHEN OPEN. DO NOT STARE INTO BEAM.
2 seconds (*)
\45\5D\02\60
compose (sec): [range: 2-65 sec]
\45\5D\60
- enter a number string and scan End Selection
(Appendix C)