6. Operating settings trigger activation
ScanPlus 1800 - Installation Manual
123
standard mode
- for laser and ccd trigger models
- reading light and read function switched off during standby, full energy is restored when the next
reading situation occurs
- best mode for standard applications where energy consumption not critical :
- fast wake-up time
- keyboard-host communication ensured after ScanPlus time-out (necessary for wedge
applications for example)
- no current peaks during reading
- LASER SAFETY: the ScanPlus 1800 ST is a Class 2 Laser product - CAUTION - LASER
LIGHT WHEN OPEN. DO NOT STARE INTO BEAM.
active for read duration (2 s), repeat read duration after good read
\46\5D\45\5D\02\46\4C\60
active for read duration (2 s), standby after good read
\46\5D\45\5D\02\46\4D\60
active while trigger pressed, standby after good read (*)
\46\5D\46\5A\03\3F\46\4D\60
- (*) default setting for laser models
To Next Page
Loading...
Need help?
General
