Intermec ScanPlus 1800 - LRC (Longitudinal Redundancy Check); Postamble

4. Data transmission settings RS-232
ScanPlus 1800 - Installation Manual 59
postamble
[preamble] [symbology id] <data> [postamble]
none
\45\54\3E\00\60
Carriage Return + Line Feed (*)
\45\54\3E\0D\3E\0A\60
Carriage Return
\45\54\3E\0D\60
Line Feed
\45\54\3E\0A\60
compose:
\45\54\60
- enter an ASCII string and scan End Selection
(Appendix A)
- maximum = 20 characters
LRC (longitudinal redundancy check)
not active (*)
\4F\60