3. Terminal / cash register used in your application predefined terminal selections
ScanPlus 1800 - Installation Manual
21
RS-232
- switch off the host system before you connect the cables and power supply !
- 2 green LED flashes at power-up
standard RS-232 C (9600, 7, E, 2)
\41\4A\01\24\60
- predefined terminal selection also available with the terminal selector
- PC serial port compatible
- customize individual RS-232 settings to suit your system after reading
this parameter
special RS-232 configurations
TTL logical 0 = 0V (9600, 7, E, 2)
\41\4A\01\24\60
- customize individual RS-232 settings to suit
your system after reading this parameter
TTL logical 0 = 5V (9600, 7, E, 2)
\41\4A\01\24\40\50\60
- customize individual RS-232 settings to suit your
system after reading this parameter
PC Term (19200, 8, none, 2)
\41\4A\01\26\60
To Next Page
Loading...
Need help?
General
