Intermec ScanPlus 1800 - Standard 2 of 5; Check Digit Mod 10; Format

5. Symbologies Standard 2 of 5
ScanPlus 1800 - Installation Manual 109
Standard 2 of 5
- numerical symbology
- default format = Identicon (6 start/stop bars)
- also referred to as "Straight 2 of 5" and "Industrial 2 of 5"
not active (*)
\41\51\60
active
\41\50\60
format
Identicon (6 start/stop bars) (*)
\43\47\60
Computer Identics (4 start/stop bars)
\43\46\60
check digit mod 10
not used (*)
\43\4A\60
checked and transmitted
\43\48\60