INVT GD200-037G/045P-4 - P07 Group: Human-Machine Interface

Goodrive200 inverters Function codes
89
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
ding HDO
output to
the lower
limit
P06.29
Upper limit
of HDO
output
100.0%
○
P06.30
Correspon
ding HDO
output to
the upper
limit
50.00
kHz
○
P06.31
HDO
output filter
time
0.000s
○
P07 Group Human-Machine Interface
P07.00
User’s
password
0~65535
The password protection will be valid when
setting any non-zero number.
00000: Clear the previous user’s password, and
make the password protection invalid.
After the user’s password becomes valid, if the
password is incorrect, users cannot enter the
parameter menu. Only correct password can
make the user check or modify the parameters.
Please remember all users’ passwords.
Retreat editing state of the function codes and
the password protection will become valid in 1
minute. If the password is available, press
PRG/ESCto enter into the editing state of the
function codes, and then “0.0.0.0.0” will be
0 ○