System Commands
Copyright© Itech Electronic Co., Ltd. 18
Returns
< value >,< value >,< value >
SYSTem:TIME
This command is used to set the system time.
Command syntax
SYSTem:TIME <value>,<value>,<value>
Arguments
<value> hh
<value> mm
<value> ss
Example
SYSTem:TIME 8,45,22
Query syntax
SYSTem:TIME?
Returns
<value>,<value>,<value>
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
This command is used to set the address of GPIB interface.
Command syntax
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <value>
Arguments
<value>
Arguments range
1~30
Query syntax
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Returns
<value>
To Next Page
Loading...
