ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 29
Command syntax
MEASure [:SCALar]:VOLTage? <A>
Arguments
<A>
Returns
<float>
MEASure[:SCALar]:CURRent?
This command is used to read the A real-time currents.
Command syntax
MEASure[:SCALar]:CURRent? <A>
Arguments
<A>
Returns
<float>
MEASure[:SCALar]:POWer[:REAL]?
This command is used to read the A real-time powers.
Command syntax
MEASure[:SCALar]:POWer[:REAL]? <A>
Arguments
<A>
Returns
<float>
MEASure[:SCALar]:POWer:APParent?
This command is used to read the A real-time apparent powers.
Command syntax
MEASure[:SCALar]:POWer:APParent? <A>
Arguments
<A>