ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 19
SYSTem:COMMunicate:LAN:CURRent:ADDRess
This command is used to set the address of IP interface.
Command syntax
SYSTem:COMMunicate:LAN:CURRent:ADDRess <string>
Arguments
<string>
Unit
None
Example
SYSTem:COMMunicate:LAN:CURRent:ADDRess “192.168.0.10”
Query syntax
SYSTem:COMMunicate:LAN:CURRent:ADDRess?
Returns
<string>
SYSTem:COMMunicate:LAN:CURRent:DGATeway
This command is used to set gateway of power supply.
Command syntax
SYSTem:COMMunicate:LAN:CURRent:DGATeway <string>
Arguments
<string>
Unit
None
Query syntax
SYSTem:COMMunicate:LAN:CURRent:DGATeway?
Returns
<string>
SYSTem:COMMunicate:LAN:CURRent:SMASk
This command is used to set the subnet mask of power supply.