System Commands
Copyright© Itech Electronic Co., Ltd. 45
Command syntax
WAVE:TRIGger[:STATe]?
Returns
Auto| Auto?|Trig|Trig?|Stop
WAVE:SCOPe:DIVTime
This command is used to set the resolution time interval.
Command syntax
WAVE:SCOPe:DIVTime
Arguments
0.0005|0.001|0.002|0.005|0.01|0.02|0.05|0.1|0.2
Unit
s
Query syntax
WAVE:SCOPe:DIVTime?
Returns
<float>
WAVE:SCOPe:DIVTime?
This command is used to query the resolution time interval.
Command syntax
WAVE:SCOPe:DIVTime?
Arguments
None
Unit
s
WAVE:SCOPe:SELection
This command is used to set waveform display options.
Command syntax
WAVE:SCOPe:SELection
To Next Page
Loading...
