ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 46
Arguments
U|A|UA
Query syntax
WAVE:SCOPe:SELection?
Returns
U|A|UA
WAVE:SCOPe:SELection?
This command is used to query waveform display options.
Command syntax
WAVE:SCOPe:SELection?
Arguments
U|A|UA
WAVE:KNOB:SELection
This command is used to set the knob options.
Command syntax
WAVE:KNOB:SELection
Arguments
UR|AR|UB|AB|TL|TD|T/d
Query syntax
WAVE:KNOB:SELection?
Returns
U|A|TL|TD|T/d
WAVE:KNOB:SELection?
This command is used to query the knob options.
Command syntax
WAVE:KNOB:SELection?
Arguments
None