ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 84
Example
*ESE 128
Query syntax
*ESE?
Returns
<value>
Related Command
*ESR? *PSC *STB?
*ESE?
This command can query the parameter of standard event enable register.
Setting parameter can determine which bit of standard event register is 1
and the byte will enable ESB of status byte register is 1.
Command syntax
*ESE ?
Arguments
0～255
Default set
Refer to *PSC command
Example
*ESE?
Returns
<vaule>
Related Command
*ESR? *PSC *STB?
*ESR?
This command can read the value of standard event status register. After
executing this command, standard event status register is reset. Bit
definition of standard event status register is as the same as the standard
event status enable register.
Query syntax
*ESR?