ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 68
Command syntax
STEP:FREQ:INTErval <float>
Arguments
<float> float number of frequency step
Query syntax
STEP:FREQ:INTErval?
Returns
<float>
STEP:FREQ:INTErval?
This command is used to query the STEP frequency step interval.
Command syntax
STEP:FREQ:INTErval?
Arguments
None
Returns
<float>
STEP:TIME:INTErval
This command is used to set the STEP time step interval.
Command syntax
STEP:TIME:INTErval <float>
Arguments
<float> float number of time step
Query syntax
STEP:TIME:INTErval?
Returns
<float>
STEP:TIME:INTErval?
This command is used to query the STEP time step interval.