ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 48
Arguments
<float>
Unit
A
Query syntax
WAVE:CURRent:BASE?
Returns
<float>
WAVE:CURRent:BASE?
This command is used to query the current base.
Command syntax
WAVE:CURRent:BASE <float>?
Arguments
None
Returns
<float>
WAVE:VOLTage:RANGe
This command is used to set the voltage range.
Command syntax
WAVE:VOLTage:RANGe
Arguments
<float>
Arguments range
1V-100V
Unit
V
Query syntax
WAVE:VOLTage:RANGe?