ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 72
PARA,THREephase
Parameter 2：rms current time.
Query syntax
PROTect:RMS:TIME? <PARAllel|THREephase>
Returns
<float>
PROTect:RMS:TIME?
This command is used to query the delay time of RMS protection current.
Command syntax
PROTect:RMS:TIME? <PARAllel|THREephase>
Arguments
Parameter 1：Device working mode
PARA,THREephase
Returns
<float>
PROTect:RMS:CTR
This command is used to set the control mode of RMS protection current.
Command syntax
PROTect:RMS:CTR <PARAllel|THREephase>,<IMME|TIME>
Arguments
Parameter 1：Device working mode
PARA,THREephase
Parameter 2：RMS Current control mode
IMME
TIME
Query syntax
PROTect:RMS:CTR? <PARAllel|THREephase>
Returns
<IMME|TIME>