ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 22
Returns
<RS232|USB|GPIB|LAN>
SYSTem:COMMunicate:SERial:BAUDrate
This command is used to set the baudrate of RS232.
Command syntax
SYSTem:COMMunicate:SERial:BAUDrate
Arguments
4800|9600|19200|38400|57600|115200
Query syntax
SYSTem:COMMunicate:SERial:BAUDrate?
Returns
<4800|9600|19200|38400|57600|115200>
SYSTem:BACKlight:BRIGhtness
This command is used to set the brightness of backlight.
Command syntax
SYSTem:BACKlight:BRIGhtness <value>
Arguments
<value>
Arguments range
1-9
Query syntax
SYSTem:BACKlight:BRIGhtness?
Returns
<value>
SYSTem:POSetup
This command is used to set the system power-on parameter.
Command syntax
SYSTem:POSetup RST|SAV0