ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 47
Returns
U|A|TL|TD|T/d
WAVE:VOLTage:BASE
This command is used to set the voltage base.
Command syntax
WAVE:VOLTage:BASE
Arguments
<float>
Unit
V
Query syntax
WAVE:VOLTage:BASE?
Returns
<float>
WAVE:VOLTage:BASE?
This command is used to query the voltage base.
Command syntax
WAVE:VOLTage:BASE?
Arguments
None
Returns
<float>
WAVE:CURRent:BASE
This command is used to set the current base.
Command syntax
WAVE:CURRent:BASE <float>