ITech IT7600 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 26
Chapter3 Measurement Commands
FETCh[:SCALar]:VOLTage?
This command is used to read the A voltages.
Command syntax
FETCh[:SCALar]:VOLTage? <A>
Arguments
<A>
Returns
<float>
FETCh[:SCALar]:CURRent?
This command is used to read the A currents.
Command syntax
FETCh[:SCALar]:CURRent? <A>
Arguments
<A>
Returns
<float>
FETCh[:SCALar]:POWer[:REAL]?
This command is used to read the A powers.
Command syntax
FETCh[:SCALar]:POWer [:REAL]? <A>
Arguments
<A>
Returns
<float>
FETCh[:SCALar]:POWer:APParent?
This command is used to read the A apparent powers.