Эксплуатация – АВТОМАТИЧЕСКИЙ РЕЖИМ "PROFILING"
Operation - AUTOMATIC “PROFILING”
7.8.1 Блокировка данных колеса “Rim Data Freeze”
Rim Data Freeze
,
().
, ..
Примечание:
: (PROFILING - OPTIMA - OPTIMA
ADVANCED).
Порядок работы
.
.
;
.
,
Rim Data Freeze» (1, Рис. 7-27)
F2.
(2, Рис. 7-27a).
.
.
.
:
F2, Rim Data
Freeze» (1, Рис. 7-27).
Отмена функции:
F2
Rim Data Freeze» (1, Рис. 7-27).
(3, Рис. 7-
27b),
.
7.8.1 Wheel Data Freezing “Rim Data Freeze”
The Rim Data Freezefunction allows you to save the
data detected on a first rim, of a group of identical wheels
(usually four) to be balanced.
This function enhances machine performance since it
reduces the data acquisition time for the subsequent
identical wheels after the first
Note:
This feature is only available in AUTOMATIC Mode:
(PROFILING - OPTIMA - OPTIMA ADVANCED).
How the function works
Clamp the first wheel.
Perform a run.
During the run, all wheel data is defined by the unit by
means of the automatic remote gauges; if necessary the
operator can change the values suggested by the machine
After the first wheel has been balanced, before clamping
another wheel from the set on the machine, you can freeze
the rim data by selecting Rim Data Freeze (1, Fig. 7-27)
in the F2 Menu. The (2, Fig. 7-27a) icon is immediately
displayed.
The subsequent wheels will be balanced without running
the wheel profile detection.
The use of the previously "frozen" data, reduces the cycle
time considerably.
If previously enabled, the laser pointer function can be
used for weight placement.
This function is directly available at the end of the wheel
measuring run and can be activated:
from the BALANCING screen page or from the RIM DATA
INPUT screen page
press F2 and select Rim Data Freeze (1, Fig. 7-27).
To cancel the function:
The frozen rim data can be deleted at any time, by
pressing the F2 key again and selecting Rim Data Freeze
(1, Fig. 7-27).
In this way the padlock icon disappears (3, Fig. 7-27b),
to indicate that the rim scan is allowed and it will be
necessary for the wheel data acquisition at the next wheel
run.
To Next Page
Loading...