3.1 Дополнительные принадлежности
3.7 Подъемник для колеса
. 90 .
3.8 Тележка для фланцев
(17.4).
.
3.9 Фланцы с отверстиями под штифты
6
.
. .
BMW OPEL.
.
3.10 Адаптер колес SCA
SCA
.
При установке адаптера SCA следует отключить
систему зажима станка в меню функций.
.
,
SCA.
Оператор сообщает станку о фиксации или
ослаблении зажима колеса с адаптером SCA
посредством педали как обычно при
управлении центрирующим устройством.
Fig. 3.11 Конусное кольцо
.
Fig. 3.12 Инструмент для снятия противовесов
.
.
3.13 Принтер
.
3.1 Optional Accessories
3.7 Wheel elevator
It can operate with a balancer, a tire changer or placed
between a balancer and a tire changer. Lifting capacity
up to 90 kg.
3.8 Trolley for Flanges
Designed for the complete range of universal and special
perforated flanges (17.4). This accessory guarantees
maximum safety in stocking.
3.9 Perforated flanges for screw stud
A complete range of 6 universal flanges for all European
vehicles. Four flanges designed for North American
vehicles. Including bolts. Special flanges for BMW and
OPEL available. Special flange for custom-built vehicles.
3.10 SCA Flange
Adaptor for wheels with closed center hole also known as
UniLug adaptor.
When the SCA adaptor is attached to the machine
the power clamp system needs to be switched off in
the FUNCTION screen.
The operation of the machine depends a lot on the power
clamp in order to have the information addressed to the
software during some procedures. In order not to loose
the capability to know if a wheel has been clamped or not
and to keep the procedures identical a special procedure
has been implemented when the SCA adaptor is attached
to the machine.
The operator tells the machine that he clamps or
unclamp the wheel on SCA adaptor by simply lifting
the pedal in the same way as in the standard
procedure with the mid centering device.
Fig. 3.11 Tapered ring
A centring cone with a 5 taper, to achieve a higher degree
of wheel centring precision when fitting the wheel on the
balancer.
Fig. 3.12 Wheel weight removal tool
Special tool in wear resistant plastic material, essential
for the removal of adhesive weights from alloy wheels.
Ensures that the rim surfaces are not damaged.
3.13 Printer
The colour printer produces a professional report that can
be delivered to the client as the balancing certificate. This
certificate can function as an extended guarantee of
performance.
To Next Page
Loading...