Руководство по эксплуатации
7.1 РУЧНОЙ режим - Настройки
:
Тип транспортного средства ()
Режим балансировки (
)
Ширина обода диаметр ()
Расстояние
.
.
Easy Alu.
7.1 MANUAL Mode - Settings
To establish the imbalance value the machine must have
been given the following basic information:
Vehicle type (depending on rim type)
balancing mode (weight fitting position on rim)
Rim width and diameter (nominal or effective)
Distance between machine and left correction plane
This data can be entered one at a time by recalling the various
options in the respective menus. This allows the machine
to calculate imbalances on the basis of NOMINAL
(theoretical) data.
For normal balancing procedures it is always better to enter
data using the automatic data reading system in the
Easy Alu function.
To Next Page
Loading...