* = Factory adjusted mode
Сохранение изменений
,
.
.
.
Сохранение рабочих режимов в постоянной
памяти
No* =
Activate =
.
,
( .)
.
10.1 Список рабочих режимов
Возможные режимы работы станка
. 5. .
No* =
Activate = .
.
Выбор языка
:
, , , ,
, .
Громкость звуковых сигналов
0100 ( - ).
50.*
,
OK
F5.
.
Saving Changed Parameters
Changes to operating modes can be saved permanently
using the "Saving operating modes in the permanent
memory" function so they are retained every time the
machine is started up.
Operating modes that are changed but not saved are reset
to the pre-change value after the machine has been
switched off.
The possible changes of modes and the necessary inputs
are described in the following.
Saving modes of operation in permanent
memory
No* = No storage
Activate = Fixes the data in the permanent memory
Store in the permanent memory a threetone signal is
given to acknowledge acceptance.
If the mode stored in the permanent memory is to be
changed, enter the desired state (e. g. on or off) for the
mode in question and transfer it into the permanent
memory.
10.1 List of modes of operation
Setting modes of operation as recommended
See 5. Switching on the machine.
No* = No action
Activate = Factoryadjusted modes of operations are set.
The selected mode of operation can be transferred to the
permanent memory.
Language selection
Selecting the menu language. A number of languages are
available, such as: English, German, Italian, French,
Spanish, Portuguese.
Volume of the audible signals
Scale of volume 0 to 100 (low - high).
Factoryadjusted to 50.*
The volume is not changed before the OK o F5 key is
pressed for quitting the mode.
The selected mode of operation can be transferred to the
permanent memory.
To Next Page
Loading...