Эксплуатация – АВТОМАТИЧЕСКИЙ РЕЖИМ OPTIMA
Operation - AUTOMATIC “OPTIMA”
7.10.4 Функция диагностики режима Optima
OPTIMA
.
Дополнительная диагностика биений
Optima
F3 OPTIMA:
Меню F3
1: .
2: .
3 .
4 .
Меню F2
6: OPTIMA ENTRY
7: 1-, 2-, 3- .
8: .
9: .
10: .
11: .
12: .
Примечание:
F6.
Многопозиционное биение
3 F3 (рис. 7-57)
(рис. 7-58).
.
3 7,
.
.
OPTIMA Settings / Measure Wheel Runout in
Multiple Positions (Настройки OPTIMA /
Многопозиционное измерение биений колеса)
Enable OK
7.10.4 Optima Diagnosis
This Advanced Options function, available in OPTIMA
mode, shows additional data and graphs relative to the
wheel runout.
Runout Advanced Diagnosis
In the F3 Menu of the OPTIMA DIAGNOSIS screen, use
the items listed below to access the Optima Advanced
Diagnosis graphs:
Menù F3
1: Radial Runout Diagnosis.
2: Rim Radial/Lateral Runout Diagnosis.
3 Multiple Positions Runout Diagnosis.
4 Multiple Harmonics Runout Diagnosis.
Menù F2
6: Go back to the OPTIMA ENTRY screen
7: Display the data of the 1st, 2nd, 3rd harmonic.
8: Runout radial de la rueda completa.
9: Runout radial del lado izquierdo de la llanta.
10: Runout radial del lado derecho de la llanta.
11: Runout lateral del lado izquierdo de la llanta.
12: Runout lateral del lado derecho de la llanta.
Note:
The print keys are available in the F6 Menu if the printer
is enabled.
Runout on Multiple Positions
Item 3 of the F3 Menu (fig. 7-57) allows access to the
Runout on Multiple Positions screen (fig. 7-58).
Displays the data of the Runout detected in portions of
the wheel, perpendicular to the axis.
Based on the width of the tyre, it is divided in various
parts, from 3 to 7, for which an independent analysis of
the Runout is available.
To enable the function access the "SETTINGS" Screen
and access the following:
OPTIMA Settings / Measure Wheel Runout in
Multiple Positions
set Enable and press OK.
To Next Page
Loading...