Эксплуатация – АВТОМАТИЧЕСКИЙ РЕЖИМ
OPTIMA FULL DIAGNOSTIC
Operation - AUTOMATIC
"OPTIMA FULL DIAGNOSTIC"
Рис. 7-93 - Рис. 7-94
:
• F3
(Рис. 7-93).
• F3
(Рис. 7-94).
7.11.2.3 Масштабирование изображения
"OPTIMA FULL
DIAGNOSTIC" :
"TREAD PLOT", "INTERNAL SIDEWALL
PLOT" "EXTERNAL SIDEWALL PLOT"
.
• F2, "Lens" (3, Рис. 7-95).
(Рис. 7-95).
.
"3D PLOT"
.
• F4,
(Рис. 7-96).
Примечание:
.
• F4,
.
.
Примечание:
- F3,
(Рис.
7-92, 7-93, 7-94).
Fig. 7-93 - Fig. 7-94
To turn the wheel in relation to the horizontal position:
• Press the Menu key F3 on the right part to view the
internal sidewall of the wheel (Fig. 7-93).
• Press the Menu key F3 on the left part to view the
external sidewall of the wheel (Fig. 7-94).
7.11.2.3 Lens and Zoom
In the "OPTIMA FULL DIAGNOSTIC" screens you can
Magnify and Zoom, as follows:
Each "TREAD PLOT", "INTERNAL SIDEWALL PLOT" and
"EXTERNAL SIDEWALL PLOT" screen feature the
Magnify function.
• Press the Menu key F2, "Lens" item (3, Fig. 7-95).
The image will be zoomed (Fig. 7-95).
Press the key again to return the image to the original
view.
In the "3D PLOT" screen you can activate the Zoom, to
zoom in or out of the image.
• Press the Menu key F4 in the top part, to zoom in the
image (Fig. 7-96).
Note:
The zoom is useful for anomalies limited to a small
area, as shown in the example.
• Press the Menu key F4 in the low part, to zoom out
the image.
Each time the key is pressed increases, positively or
negatively, the level of Zoom.
Note:
After having activated the zoom, the wheel can still be
rotated manually and turned to the right and left with
the function key F3, like the basic view with 0 Zoom
(Fig. 7-92, 7-93, 7-94).
To Next Page
Loading...